RGB colour changing lighting kit with 60mm LED bulbs and power adapter on a gray surface

60mm Recessed Lighting Kit - RGB

Standard
£74.99 GBP
Skip to product information
RGB colour changing lighting kit with 60mm LED bulbs and power adapter on a gray surface

60mm Recessed Lighting Kit - RGB

SD095

60mm Recessed Lighting Kit - RGB. Pack of 10.

  • Pack of 10 Lights
  • Lights are IP68 rated – suitable for use outside
  • 1m cable between each light
  • Each light contains 9 SMD LEDs
  • Polished 304 grade stainless steel bezel
  • Designed to sit flush on any hard flat surface
  • 10 additional lights can be connected to this kit

Available in either Standard or Easy Change Fitting.

The lights for the Easy Change and standard fitting are identical. Easy Change kits allow for easy removal of the light heads when the need arises. Designed specifically for installations where access to the wiring can be difficult.

£74.99 GBP
Choose Style
More Information
  • Lights are IP68 rated – suitable for use outside
  • 1m cable between each light
  • RF receiver and remote control
  • Each light contains 9 SMD LEDs
  • Polished 304 grade stainless steel bezel
  • Designed to sit flush on any hard flat surface
  • 10 additional lights can be connected to this kit

Memory Function – If the lights are switched off and then back on, they start in the same mode they were switched off in.

The kit also has a radio frequency (RF) remote control and control unit so you do not need line of sight as you do with many similar kits that work from infrared (IR). This means you can hide the control unit out of sight helping create very clean lines with your installation.

Multi Function Touch Dial Remote Control – IP21
Remote requires 2 x AAA batteries – Not included

What you get

Standard:

  • 10 x 60mm 12v LED lights - Each light has 1m of wire pre attached
  • 1 x Transformer IP68 – Suitable for use outside
  • 1 x 5m cable to connect from the transformer to the first light
  • 1 x RF Control unit with 1m of wire to the transformer IP44
  • 1 x Remote control IP21

Easy Change:

  • 10 x 60mm 12v LED lights - short length of wire pre attached.
  • 9 x 1m Extension leads
  • 1 x Transformer IP68 – Suitable for use outside
  • 1 x 5m cable to connect from the transformer to the first light
  • 1 x RF Control unit with 1m of wire to the transformer IP44
  • 1 x Remote control IP21

Specifications
  • Diameter - 60mm
  • Depth - 25mm
  • Cut out - 44mm
  • Watts per light - 1.2w
  • LEDs per light - 9
  • Outer bezel - Polished stainless steel

Accessories

RGB Accessories
RGB Accessories

RGB Accessories

You may also like